S3 Surface Controls Overview 20
Fader Banking Controls
Bank tracks to the channel strips using the Bank and Nudge switches. Home and End are shortcuts to the first and last banks, re-
spectively.
Bank and Nudge
The Bank and Nudge switches change which tracks are assigned to the channel strips, as follows:
< Nudge
Banks tracks one track to the left. If tracks 2–17 were banked to channel strips 1–16, tracks 1–16 are now banked to strips
1–16.
Nudge >
Banks tracks one track to the right. If tracks 1–16 were banked to channel strips 1–16, tracks 2–17 are now banked to strips
1–16.
< Bank
Banks 16 tracks to the left. If tracks 17–32 were banked to strips 1–16, tracks 1–16 are now banked to strips 1–16. Pressing
the switch
again does nothing because the first bank is already shown.
Bank >
Banks 16 tracks to the right. If tracks 1–16 were banked to strips 1–16, tracks 17–32 are now banked to strips 1–16.
Mixer and Close
Not all applications support these switches.
Mixer (Surface SHIFT+ < Nudge/Mixer)
Toggles Mix and Edit windows in Pro Tools.
Close (SHIFT + Nudge >/Close)
Closes any open window in the application.
Home and End
Home (Surface SHIFT + < Bank/Home)
Banks tracks 1–16 to the channel strips.
End (Surface SHIFT + Bank >/End)
Banks the last set of tracks to the strips.
Fader Navigation controls
Mixer Close
Home End
Nudge Nudge
Bank Bank
To Next Page
Loading...
Need help?
General
