EuControl Software 59
Workstations
A media controller can control applications running on a second computer, referred to in this guide as a workstation. The Work-
stations tab establishes the list of workstations that the
Workstation switch cycles through. Any workstation running EuControl
software can be in this list.
All Workstations
All Workstations lists all EUCON-enabled workstations on the network. If the workstation is already in the My Workstations list,
it is shown in gray and cannot be selected.
My Workstations
My Workstations lists the workstations that can be attached to by pressing the Workstation switch (Surface SHIFT + Applica-
tion/Workstation)
.
It is possible to put a workstation in the My Workstations list that is already attached to another instance of EuControl running on
another computer. It cannot be attached here until it is unattached from the other instance of EuControl. This allows multiple users
to share workstations without having to frequently edit their
My Workstation list.
Add
Click Add to add the selected workstation from the All Workstations list to the My Workstations list. If the workstation is already
in the My Workstations list, it is grayed out and cannot be selected.
Remove
Click Remove to remove the selected workstation from the My Workstations list.
Workstations tab
To Next Page
Loading...
Need help?
General
