Avid Recording Studio User Guide8
5 When the following screen appears, click
“Continue” and follow the on-screen instruc-
tions.
6 Choose the picture of Fast Track on the next
screen, click “Continue” and follow the on-
screen instructions to install the Fast Track
driver.
7 Once the installation is complete and your
computer has been restarted, connect Fast Track
to an available USB port on your computer.
Windows
The Pro Tools SE DVD runs a two-stage installa-
tion process. Stage 1 installs Pro Tool SE, and
Stage 2 installs the Fast Track Driver.
To Install Recording Studio:
1 Make sure Fast Track is not connected to your
computer.
2 Insert the Pro Tools SE DVD into your com-
puter.
3 Click “Continue” to install Pro Tools SE.
Click Continue
Software instrument content is very large
and may take up to 30 minutes to install.
During this time, the progress bar may not
appear to move but your software is still in-
stalling. Do not terminate your installation.
Driver Selection - Fast Track
It is important to carefully read and follow
all on-screen instructions.
In Windows 7, if the User Account Control
dialog appears, click “Allow.”
If the Welcome screen doesn’t appear, locate
and double-click Setup.exe.
Pro Tool SE - Welcome Screen
Software instrument content is very large
and may take up to 30 minutes to install.
During this time, the progress bar may not
appear to move but your software is still in-
stalling. Do not terminate your installation.
To Next Page
Loading...
Need help?
General
