WEAT C2N – V1 - EN 3
• 1 motor assembly with built-in electronic board.
• 1 adjustable base
• 4 m reinforced nylon rack
in 50 cm modules
• 2 limit stops to be installed on rack
• 2 four-channel remote controls
• 1 flashing beacon (to be positioned on post so as to be visible
from street)
• 1 set of photocells
(position 40 cm max. from bottom of post)
• 1 lighting module (required to light the gate’s
path of movement)
• 1 operator control relay powered
by a 12 V supply from a door phone
(connect the red and black wires on
the 12 V door phone control and the
2 white wires on the operator board’s
auxiliary control)
Options (not supplied)
WEATEM 4: extra remote control - WEATCC 2: key switch
WECACV 70002: Wireless keyboard - WEATCE 2: 50 cm length of rack
WEATBT B2: backup battery kit that provides for WE 8111 BIS and ATCR 2
WEATAN 2:external antenna for extended range - WEATDT 80301:emergency bar 2 m.
WEATER 3: Two WEATEM 3 remote control units and one12 VDC, 2-channel radio
receiver.
WE 8111 BIS
TCR 2
1. KIT CONTENTS
To Next Page
Loading...
