Name: Avigilon 2.0C-H5A-PTZ-DP36
Brand: Avigilon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1. Place the camera on a flat surface with the dome facing up.

2. Use the T20 star key to loosen the 4 tamper resistant screws and then remove the dome cover.

3. Remove the protective foam material inside the dome cover. Remove the plastic protective film

from the inside of the dome cover.

4. If you are planning to use onboard storage, insert an SD card into one of the SD card slots on the PTZ

camera. For more information, see (Optional) Configuring Onboard Storage on page31.

Preparing the Camera for Installation 9

Questions and Answers:

Need help?

Do you have a question about the Avigilon 2.0C-H5A-PTZ-DP36 and is the answer not in the manual?

Avigilon 2.0C-H5A-PTZ-DP36 Specifications

General