Avigilon 2.0C-H6A-BO1-IR - Page 21

3. To use the camera in portrait mode instead of landscape mode:
a. Use a T20 Pin-In star-shaped driver to unscrew and remove the sun shroud mount from the
camera.
Note: The sun shroud should only be removed when the camera is installed indoors
and space is limited.
b. Rotate the camera.
c. Use a T20 Pin-In star-shaped driver to screw on the sun shroud mount.
4. Tighten the adjustment screws on the mount arm to secure the camera’s position.
Aiming the Camera 14