Avigilon 2.0C-H6SL-BO1-IR - Accessing the Live Video Stream

1. Locate and make note of the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a. arp -s <New Camera IP Address> <Camera MAC Address>
For example: arp -s 192.168.1.10 00-18-85-12-45-78
b. ping -l 123 -t <New Camera IP Address>
For example: ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command Prompt window when you see the following message:
Reply from <New Camera IP Address>: ...
Accessing the Live VideoStream
Live video stream can be viewed using one of the following methods:
l
The mobile web interface using the USB WiFi Adapter. For more information, see (Optional) Using the
USB Wi-Fi Adapter on page14.
l
Web browser interface: http://< camera IP address>/.
l
Network Video Management software application (for example, the Avigilon Control Center software).
Accessing the Live VideoStream 16