Pre-installation Information
Preinstallation
The product has to be setup properly on your network to perform e-mail and
filing functions. The following network parameters have to be set.
Important!
Make a copy of the following table and ask your Network Administrator
to complete the information.
1. DHCP Enable:
2. IP Address: . . .
3. Subnet Mask: . . .
4. Gateway IP: . . .
5. DNS Server: . . .
6. Mail Server: . . .
7. Port # of Mail
Server
Explanation of contents:
1. *DHCP Enable: Choose Yes to obtain IP/subnet/gateway/DNS
server/WINS server addresses automatically
from DHCP server.
2. *IP Address: The Internet Protocol (IP) address assigned to
your machine by your network administrator or
by DHCP server.
3. Subnet Mask:
The net mask address assigned by your
network administrator or by DHCP server.
4. Gateway IP: The gateway IP address assigned by your
network administrator or by DHCP server or by
DHCP server.
5. *DNS server: The IP address of DNS server assigned by your
network administrator.
To Next Page
