Avitel 5303 - Remote Start Ribbon Harness, Wiring Diagram; Heavy Gauge Relay Satellite Wiring Diagram; Remote Start Harness, (H3) 5-Pin Connector

13
© 2008 Directed Electronics. All rights reserved.
➤ Remote start ribbon harness, wiring diagram
1
PINK/WHITE (-) 200mA PROGRAMMABLE IGN2/ACC2 RELAY TURN ON
2
YELLOW (+) IGNITION INPUT TO ALARM
3
PINK (-) 200mA IGNITION RELAY TURN ON
4
ORANGE (-) 200mA ACCESSORY RELAY TURN ON
5
PURPLE (-) 200mA STARTER RELAY TURN ON
6
ORANGE/BLACK (-) ANTIGRIND/GROUND WHEN ARMED OUTPUT
7
BLUE (-) 200 mA STATUS OUTPUT
The ribbon harness connects to the relay satellite
➤ Heavy gauge relay satellite wiring diagram
H/1
PURPLE STARTER OUTPUT TO STARTER (STARTER SIDE)
H/2
GREEN STARTER INPUT FROM IGNITION (KEY SIDE)
H/3
RED (+) HIGH CURRENT 12V INPUT
H/4
ORANGE OUTPUT TO ACCESSORY CIRCUIT
H/5
PINK OUTPUT TO PRIMARY IGNITION CIRCUIT
H/6
RED (+) (30A) HIGH CURRENT 12V INPUT
H/7
PINK/WHITE OUTPUT TO SECOND IGNITION CIRCUIT
H/8
RED/WHITE (+) (30A) HIGH CURRENT 12V INPUT
➤ Remote start harness, (H3) 5-pin connector
H3/1
BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT
H3/2
VIOLET/WHITE TACHOMETER INPUT WIRE
H3/3
BROWN (+) BRAKE SHUTDOWN INPUT WIRE
H3/4
GRAY (-) HOOD PINSWITCH INPUT, ZONE 1
H3/5
BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER - Latched Pulsed