Need help?Do you have a question about the AVMATRIX VS0601U and is the answer not in the manual?
General| Input Ports | 4x SDI, 2x HDMI |
|---|---|
| SDI Standard | 3G-SDI |
| Resolution Support | Up to 1080p60 |
| Power Supply | DC 12V |
| Storage Temperature | -20°C to 60°C |
| Output Ports | 2x SDI, 1x HDMI |
| Video Format Support | 1080p, 1080i, 720p |
| Audio Input | Embedded |
| Audio Output | Embedded |
| USB | 1 x USB type-C |
| Control | RS-232 |
| Transitions | Mix, Wipe, Fade |
| Weight | 1.5 kg |
Important safety warnings and precautions for operating the unit to prevent hazards like falling, electrical shock, or fire.
Provides a general introduction to the VS0601U switcher, its capabilities, and applications.
Details the key features of the VS0601U, including input/output types, transition effects, and audio support.
Lists and describes the various input and output connectors located on the rear panel of the device.
Explains the pin assignments and definitions for the Tally connector on the rear panel.
Describes the layout of the multiview display, showing Preview and Program feeds from input signals.
Explains how to switch between Program (PGM) and Preview (PVW) video sources.
Details the types of transition controls available for the video switcher.
Details the Fade to Black (FTB) function for emergency use, including its operation and indicators.
Explains the various transition effects supported by the switcher.
Describes the MIX transition effect, a basic A/B dissolve, and how to activate it.
Explains the WIPE transition effect, its operation, and the availability of different wipe patterns.
Describes the FADE transition effect, a gradual fade between sources, and its activation.
Details the audio input and output configurations and settings.
Details the audio input and output configurations, including analog and embedded SDI audio.
Explains how to use the USB3.0 port for uncompressed live streaming, including compatibility.
Covers settings for SDI PGM/AUX and Multiview output formats, including resolution and selection.
Details the audio input/output configurations and supports audio following video and mixing.
Explains how to configure the audio mixer for mixing mode, allowing selection of audio sources.
Describes the Audio Follow Video (AFV) mode, where audio follows the selected video source.
Details the Picture-in-Picture (PIP) mode, its display on the PVW window, and customizable settings.
Explains how to navigate and access the main menu for system configurations.
Covers system settings such as language selection and clock display format.
Explains network configuration options for IP acquisition, dynamic or static IP addressing.
Explains network configuration options for IP acquisition, dynamic (DHCP) or static IP addressing.
Details the configuration of the network subnet mask, including the default value.
Describes how to set the gateway address in relation to the current IP address configuration.
To Next Page
