Avocent Cyclades ACS 5000 - IPDU Configuration and Management

92 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
To set up which servers the users may access:
1. Enter the following command to set up a menu, which is prompted when you connect from a
dumb terminal. Refer to Table 5.13 for configuration parameters.
cli> config applications terminalmenu add [parameter] <value>
2. Activate and save your configuration.
NOTE: You may open an SSH connection to the desired server. To do so, substitute telnet host_ip with ssh -l
username host_ip.
Terminal Appearance
You may change the banner appearance when a connection is made to a server. The banner
appearance may be port-specific or a unified banner for all ports.
To configure the terminal appearance:
1. Enter the following command to configure a banner for one or multiple serial ports.
cli> config physicalports [all|range] other banner "<login banner>"
NOTE: A banner string with spaces must be enclosed by double quotes "<string1 string2>".
2. Activate and save your configuration.
Table 5.13: Terminal Profile Menu Configuration Parameters
Parameter Value Description
menutitle <string> Type a description for the menu title bar.
actionname <action name> Enter n identification for the command. For example,
server name.
command <string> Enter a command such as telnet host_ip.