Avocent Cyclades ACS 5000 - Backup Configuration

136 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
Session Management
cli> administration sessions [parameter] <value>
Backup configuration
Save or restore configuration to an FTP server
cli> administration backupconfig [parameter] <value>
In the following example, the command loads a configuration from a server with IP address
192.168.0.1, username john, password john1234 and the configuration file located at
/home/configuration.
backupconfig> loadfrom serverip 192.168.0.1 pathname
/home/configuration username john password john1234
Table B.3: CLI Session Management Parameters
Parameter Value Description
Kill <Serial Port
Number[1-1024]>
To cancel a connection to the serial port <n>
LIst Lists the current sessions
Table B.4: Backup Configuration Parameters
Parameter Level1 Parameter Level2 Parameter Level3 Value
loadfrom ftp username
password
serverip
pathname
<username>
<password>
<serverip>
<pathname>
saveto ftp username
password
serverip
pathname
<username>
<password>
<serverip>
<pathname>