Avocent Cyclades ACS 5000 - Troubleshooting Flash Memory Loss

Appendices 123
3. Activate and save your configuration.
Table A.10: IPMI CLI Configuration Parameters
Parameter Value Description
add <alias> Add and configure an IPMI device.
edit <alias> Edit the parameters of an IPMI enabled device.
delete <alias> Remove an IPMI device.
authtype md2
md5
none
password
Add an authentication method.
password <password> Assign a password to access the device.
privilege admin
operator
user
Assign a user access level.
serverip <n.n.n.n> IP address of the device.
username <name> Username to access the device.
key <^(character)> The hotkey used to access the IPMI.
NOTE: The default IPMI hotkey is ^I, where ^
stands for the Ctrl key on the keyboard. The
hexadecimal code for the Ctrl+I default IPMI
hotkey is the same as the keyboard’s Tab key.
You may choose to change the default using
this parameter.
server <alias> The name of the IPMI device.