28 ESP-4 MI Serial Hub Installer/User Guide
b. To change a field, click the appropriate radio button, enter a valid value or choose from a
listbox. Table 4.1 indicates where to find more information.
c. If you enable the modem emulation connection method and enable outgoing calls, you
may also configure dialout translation by clicking the Configure Dialout Translation link.
The dialout translation table for that port will be displayed. You may configure up to eight
sets for each port. For each set, enter a translate string, an IP address and a port number. A
null string disables that translation set. If you changed any values, click Apply.
See Dialout translation on page 21 for more information.
d. If you changed any values, click Apply. You will be prompted to confirm. When
confirmed, the EEPROM configuration is updated immediately. The change will take
effect during the next connection to that port.
Sending a Break to a Port
The Send Break feature sends a line break to an attached device.
To send a break to a port:
1. From the Main Menu, select Port 1 Configuration, Port 2 Configuration, Port 3 Configuration
or Port 4 Configuration. The Port Configuration window for that port opens.
2. Enable the Send Break to Port radio button, then click Apply.
Displaying Hardware Information
The Hardware Information display includes the following items.
• Model number
• Hardware revision number
• Number of serial ports
• EEPROM revision number
Table 4.1: Reference to Connection Method Rules and Values
For this method See this table for descriptions, rules and values
Serial port redirection Table 3.1 on page 12
Telnet server Table 3.2 on page 13
Raw TCP server Table 3.3 on page 14
Raw TCP client Table 3.4 on page 15
Modem emulation Table 3.5 on page 16
Configuration utility Table 3.9 on page 22
To Next Page
Loading...
