EasyManua.ls Logo

avolta A015A-12C - Page 17

avolta A015A-12C
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
the machine moves in the lowest refrigeration mode; If "High" is selected, the machine works at the
maximum refrigeration capacity, regardless of the setting temperature, Medium or Low.
4. TEMP+ (UP)
In the cooling function, each time press TEMP+ (UP) to set the temperature decreased by 1 .
In the heating function, each time press TEMP+ (UP) to set the temperature decreased by 1 .
5. PROGRAMMABLE TIMER
Programmable timer ON/OFF.
TIMER-ON: The timer-on is used to turn on the unit automatically after the set time is over.
1. Press the "TIMER" key at stand-by status with the corresponding flashing, then set the time you
desire by pressing "TIMER" key. And then by adjusting the TEMP- (DOWN) and TEMP+ (UP) (a
step of 1H) to set the timer with an interval range of 1-24 hours.Finally click this key, and the timer
starts. Meanwhile the timing value keeps lighting and displaying the remaining time.
2. Once the set hour has come to an end, the unit will turn on automatically.
3. To cancel the timer, you can click this button again.
4. Press the "POWER" key before timeout, the setting time will be canceled and the unit will turn on.
TIMER-OFF: The timer-off is used to turn off the unit automatically after the setting time is over.
1. Press the "TIMER" key at operating status, Click the timing key, with the corresponding timing
value flashing, then set the time you desire by pressing "TIMER" key. And then by adjusting the
TEMP- (DOWN) and TEMP+ (UP) (a step of 1H) to set the timer with an interval range of 1-24
hours.Finally click this key, and the timer starts. Meanwhile the timing value keeps lighting and
displaying the remaining time.
2. Once the set hour has come to an end, the unit will turn off automatically.
3. To cancel the timer, you can click this button again.
4. Press the "POWER" key before timeout, the setting time will be canceled, and the machine will be
shut down to stop running.
6. MODE
Press the mode key for mode conversion by select "cooling, dehumidify or heating".
Cooling Operation
1. Press the MODE key for the cooling indicate on. When the refrigeration function is carried out, the
Note: In the dehumidify mode, wind speed is not adjustable, wind speed will be locked in the low wind operation

Related product manuals