avolta A015A-12C - Appearance and Function of Remote Control

17
In the dehumidification or heat-making mode, the plug "A" in the drain hole should be removed.
Drainage
The drain plug "a" in the drainage hole should be removed and an appropriate drainage pipe is
installed for continuous drainage.
※Water Full Alarm
When the tank is full, the water full indicator is illuminated. After a few minutes the "E4" code will be
displayed on the display and the compressor will automatically stop running. At this point, you can
remove the plug from the drain, drain water through the drainage pipe. “The E4 "code will
automatically disappear and the machine resumes normal operation.
5. Appearance and Function of Remote Control
5. Appearance and Function of Remote Control
Fan speed selector
Mode selector
Hourly programming
Temperature selector
up
Temperature selector
down
On/Off switch