Execute the following steps to save your settings:
1. Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
2. Reboot the camera.
NETWORK - DNS
Here, you can specify the Preferred and Alternative DNS Server.
Figure 41: WebGUI > NETWORK > DNS
Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
SYSTEM
You can use the SYSTEM tabs (described below) to define the desired system settings.
License
Figure 42: WebGUI > SYSTEM > License
If you have obtained the license for the premium features of this camera, you can enter the License key here to
unlock these features. Reboot is not required as the license is instantly activated. See for more information How to
register a license in a CM70 series.
You can acquire a license through your local sales channel or directly at Avonic.
Execute the following steps to enter your license key:
1. Enter your license key in the License field.
2. Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
3. Refresh your webpage or log out and in again.
Attributes
Figure 43: WebGUI > SYSTEM > Attributes
41