Front Air Dam Installation Steps
Page 2 of 2
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Align the flanges of the sun shield with the previously
cleaned rear window. The flanges of the sunshield should
mount flush with the outer edge of the window.Press
lightly on exposed areas of tape.
With sun shield in final position, remove remainder of
tape liner by pulling on the free ends.
Press firmly along flanges to secure sun shield to
vehicle.
3
4
5
© 2005 Lund International, Inc. All rights reserved.
Auto Ventshade
TM
, the Auto Ventshade
TM
logo and the AVS
TM
logo are trademarks of Lund International, Inc.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
™
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
To Next Page
Loading...
