12
your mouse to show the password input keypad, and enter the password of the user level you want.
4.5 Video Output Switch
It’s not allowed to have video output simultaneously on a CRT monitor (connected to MONITOR) and LCD monitor
(connected to VGA).
The default video output setting is “AUTO”, meaning the DVR will automatically detect the video output source.
When VGA and MONITOR are both connected, the default monitor output is VGA.
To change the video output setting manually:
To force the video output via MONITOR, press the left key ◄ on the DVR front panel at DVR power-on.
To force the video output via VGA, press the right key ► on the DVR front panel at DVR power-on.
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialized, right-click to show the main menu, and select “ADVANCE CONFIG”
“DISPLAY” “DISPLAY OUTPUT PATH”.
Select “VGA” to switch to the connected LCD monitor, or “COMPOSITE” to switch to the connected CRT monitor.
The DVR will then reboot for the change to take effect.
ADVANCE CONFIG
CAMERA
SCREEN DWELL DURATION 03
DETECTION
VGA OUTPUT 1024 X 768
ALERT
DISPLAY COVERT ON
NETWORK
HDD DISPLAY MODE HDD SIZE
SNTP
DISPLAY OUTPUT PATH AUTO
DISPLAY
ALPHA BLENDING 200
RECORD
REMOTE
EXIT
To Next Page
Loading...
