Avtech AVC-793 - Event Log; Advance Config; Camera

riasztobolt.hu
19
5.4.4 EVENT LOG
You can check all the event information (event type, time and channel), or clear all log records.
EVENT INFORMATION
QUICK SEARCH EVENT TIME COMMENT
EVENT SEARCH KEY UNLOCK 2009/NOV/19 15:49:07
HDD INFO VIDEO LOSS 2009/NOV/19 15:32:05 04
EVENT LOG POWER ON 2009/NOV/19 15:32:02
PREV NEXT CLEAN
EXIT
5.5 ADVANCE CONFIG
5.5.1 CAMERA
ADVANCE CONFIG
CANERA CH1 CH2 CH3 CH4
DETECTION BRIGHTNESS 128
ALERT CONTRAST 128
NETWORK SATURATION 128
SNTP HUE 128
DISPLAY COV. OFF
RECORD REC ON
REMOTE CHANNEL TITLE EDIT
DCCS
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here. The
value is adjustable from 0 to 255.
2) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated,
the wording “COV.” will be shown on the channel screen.
Note: To hide the wording “COV.” When this function is on, go to “DISPLAY”, and set “DISPLAY COVERT”
to “OFF”. For details, please refer to “5.5.6 DISPLAY” at page 23.
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to “ON”.
4) CHANNEL TITLE
Click “EDIT” to input the channel title (up to six characters). The default title is the channel number.