23
5.5.6 DISPLAY
ADVANCE CONFIG
CAMERA SCREEN DWELL DURATION 03
DETECTION VGA OUTPUT 1024 X 768
ALERT DISPLAY COVERT ON
NETWORK HDD DISPLAY MODE HDD SIZE
SNTP DISPLAY OUTPUT PATH AUTO
DISPLAY ALPHA BLENDING 200
RECORD
REMOTE
DCCS
EXIT
1) SCREEN DWELL DURATION
Select the full screen dwell duration time in second (3 / 5 / 10 / 15).
2) VGA OUTPUT
Here shows the current VGA output resolution.
3) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” when covert recording is activated in “CAMERA”.
4) HDD DISPLAY MODE
Select “SIZE” to show the remaining HDD capacity for recording in GB, or “TIME” to show the remaining
recording time.
5) DISPLAY OUTPUT PATH
The default video output setting is “AUTO”, meaning the DVR will automatically detect the video output
source. When a CRT monitor and LCD monitor are both connected, the default video output is via the
connected LCD monitor.
Select “VGA” to fix the video output via the connected LCD monitor, or “COMPOSITE” to fix the video output
via the connected CRT monitor.
When the change is made, the DVR will then reboot for the change to take effect.
6) ALPHA BLENDING
Click to manually adjust the transparent level of the main menu.
5.5.7 RECORD
Note: Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all HDD data, and start recording again.
ADVANCE CONFIG
CAMERA MANUAL RECORD ENABLE ON
DETECTION EVENT RECORD ENABLE ON
ALERT TIMER RECORD ENABLE ON
NETWORK EVENT RECORD IPS 120
SNTP TIMER RECORD IPS 120
DISPLAY PRE-ALARM RECORD ON
RECORD OVERWRITE ON
REMOTE EVENT RECORD ALL CHANNEL OFF
DCCS KEEP DATA LIMIT (DAYS) OFF
EXIT
To Next Page
Loading...
