Avtech AVH800 User Manual

MAIN MENU
38
PUSH MESSAGE
Before using this function, make sure:
You have iPhone, iPad, or Android mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 1 MOBILE SURVEILLANCE
VIA EAGLEEYES” at page 41.
You have configured EagleEyes to access this NVR, and Push Video is enabled. For details, please refer to “APPENDIX 1
MOBILE SURVEILLANCE VIA EAGLEEYES” at page 41.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH MESSAGE
MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

CLEAR HDD
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “Push Video” in EagleEyes on your mobile device, and try to trigger an alarm event to see if you’ll
get pushed.
MESSAGE MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in “NETWORK” 
“E-MAIL” to send the notifications.
Enable this function in “ACTION”, select the event type(s) you want to send notifications in “EVENT”, and add
the E-mail address(es) to which you want to send notifications in “RECEIVER”.
You’ll get an E-mail telling you the occurrence of your selected event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH MESSAGE
MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

CLEAR HDD
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
RECEIVER SETUP
EXIT

Avtech AVH800 Specifications

General

Brand	Avtech
Model	AVH800
Category	Network Hardware
Language	English