9
3.2 Ethernet Configurations
A quick installation wizard is available via your web browser for password change, date & time
settings, and network configurations.
For details about the wizard, please refer to “3.2.1 Setting in Wizard” at page 9.
For details about DDNS setting for PPPoE and DHCP, please refer to “3.2.2 DDNS Setting”
at page 11.
Note: You can also change the settings in the system configuration page via your web
browser later. For details, please refer to “5. ACCESSING THE CAMERA VIA WEB
BROWSER” in the user manual.
3.2.1 Setting in Wizard
Step1: Open your web browser, for example, Microsoft Internet Explorer, and enter
“http://192.168.1.10” in the URL address box.
Step2: In the login page, key in the default user name (admin) and password (admin), and enter
the security code from the image below. Then, click “LOGIN”.
Step3: The wizard is then starting analyzing your network environment, and shows your network
environment. Select “Next” to continue.
Step4: In “Account”, change the access password if needed.
If not, leave all the columns blank, and select “Next”.
Step5: In “Date and Time”, check if the date and time setting are correct and modify if
necessary.
To Next Page
Loading...
