18
APPENDIX 2 ADDING WIRELESS PROFILE
You can also add the wireless profile manually or via the scan function in the system configuration
page from the web browser.
A2.1 Via Scan
Note: This method is available only when the signal strength of the wireless access point
/ router your camera is intended to configure for is not too weak, and it’s set to
open for searching.
If this method is not working, please manually add the wireless profile as
described in “A.2 Manually”.
Step1: Click “Scan” to search all available wireless access points / routers, and double-click
the one your camera is intended to configure for.
Step2: The setting for the selected wireless access point / router will be shown except for the
“Key” column.
Enter the password to access the selected wireless access point / router in “Key”,
and click “Save”. The selected wireless access point / router will be added to “Profile
Name List”.
To Next Page
Loading...
