REMOTE OPERATION
23
Network Backup
Click “ ” → “ ” to go into the “Backup” page as follows, and you can select a specific time range or event
to make a video backup remotely.
Note: Before enabling the network backup function, make sure the DVR is not in the playback mode, or
the DVR will stop playback.
Function Description
IP Address / Port / User Name / Password Check if the network connection information of the DVR within which
contains the video data you need is correct.
HDD Number / Channel Specify the hard disk (HDD Number) and channel number (Channel)
within which have the video data you need.
Download by Time Specify the time range within which has the video data you want in the
“Start Time” and “End Time” columns.
Download by Event Select an event log from the event list. This list shows all logs in the
specified DVR from the latest to the earliest.
‧To quickly find the events you need, check or uncheck the event type
“System” / “Manual” / “Alarm” / “Motion”, and select the log you
want.
‧To view the earlier or later logs that are not shown in the current
page, click “Prev. Page” or “Next Page”.
‧To refresh the event list, click “Reload”.
To Next Page
Loading...
