AVTECH Software, Inc. Page 14 AVTECH.com
Room Alert S Models (RA32S-DAP-RAS & RA12S-DAP-RAS)
Sensors
Navigate to Settings → Sensors to open the Sensor Settings screen.
You may congure alert thresholds for your Room Alert’s sensors in this screen. Your Room
Alert sends alerts based on these thresholds.
Note
Note
Digital Sensor Settings
You may congure alarm thresholds for the digital sensors—both internal and external—in
this section.
For more information about AVTECH sensors and accessories, please visit the
Sensors and Accessories sections of AVTECH.com.
Notice the Use Alarm Prole drop-down menu next to each sensor. If you
have an AVTECH Light Tower, Relay Switch or built-in relays on your Room
Alert, you may congure Alarm Proles to toggle them on and o when
alarms are detected. Please refer to the Alarms section in this manual for
further information.
The Room Alert 32S has an internal temperature sensor and an internal
humidity sensor. The Room Alert 12S has an internal temperature sensor.
To Next Page
Loading...
