Avtech Room Alert S Series - Network

AVTECH Software, Inc. Page 25 AVTECH.com
Room Alert S Models (RA32S-DAP-RAS & RA12S-DAP-RAS)
Network
Navigate to Settings → Network to open the Network Settings screen.
Device Name
To rename your Room Alert:
1. Select the automatically-assigned name in Device Name and enter a new one of up to
30 characters.
Tip
2. Select Save Settings at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
IP Address Conguration—DHCP
To obtain an IP address automatically using DHCP:
1. Select Obtain IP Address Automatically, which is the default setting.
2. Select Save Settings at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
Room Alert 32S & 12S device names may be up to 30 characters and can include
the following: letters, numbers, spaces, and special characters.