AWA LT20D - User Manual

Questions and Answers

R
Ryan GoodmanAug 15, 2025
What to do if my AWA LCD TV shows 'NO SIGNAL' message?
- H
  Haley VargasAug 16, 2025
  If your AWA LCD TV displays a 'NO SIGNAL' message, ensure that the signal cable is firmly connected to both the PC and the video sources. Also, verify that the PC or video sources are powered on.
B
Billy MercerAug 19, 2025
Why is the screen blank and power indicator off on my AWA LCD TV?
- B
  Bruce SellersAug 19, 2025
  If the screen of your AWA LCD TV is blank and the power indicator is off, make sure that the power cord is firmly connected and that the LCD TV is turned on.
M
mhaysAug 21, 2025
How to fix unstable image on AWA LCD TV?
- K
  Katherine RosarioAug 21, 2025
  If the image on your AWA LCD TV is not stable and appears to vibrate, use auto tracking to clear it automatically. Also, check that the display resolution and frequency from your PC or video board is an available mode for your monitor by navigating to Control Panel, then Display, and finally Settings on your computer.
A
Autumn SalazarAug 25, 2025
What to do if the image on my AWA LCD TV is too light or too dark?
- S
  Stephanie LangAug 26, 2025
  If the image on your AWA LCD TV appears too light or too dark, adjust the Brightness and Contrast settings to your preferred level.
C
Christopher ThomasAug 27, 2025
Why is there no TV signal on my AWA LCD TV?
- D
  Darrell BenjaminAug 28, 2025
  If your AWA LCD TV is not receiving a TV signal, ensure that the antenna cable is firmly connected to the VHF/UHF jack. For PAL models, check 'Channel Memory' to ensure you've selected the correct channel system or select 'Auto Tuning' to configure the channel system automatically.
R
Randy SextonAug 31, 2025
How to center image on my AWA LCD TV?
- H
  haley10Aug 31, 2025
  To center the image on your AWA LCD TV screen, use the auto tracking feature to set the best position automatically. You can also manually adjust the horizontal and vertical position.
A
Andrew MartinezSep 2, 2025
How to fix flickering vertical bars on AWA LCD TV?
- D
  Diana WilliamsSep 2, 2025
  If vertical bars appear to flicker, jitter, or shimmer on the image of your AWA LCD TV, adjust the Frequency function. Auto Tracking will clear it automatically.
M
matthew48Sep 5, 2025
How to fix flickering horizontal bars on AWA LCD TV?
- M
  Max DrakeSep 5, 2025
  If horizontal bars appear to flicker, jitter, or shimmer on the image of your AWA LCD TV, adjust the phase function and then adjust the clock function. Auto tracking will clear it automatically.
G
gomezjustinSep 9, 2025
How to adjust sound level on AWA LCD TV?
- B
  boydkristiSep 9, 2025
  To adjust the sound level on your AWA LCD TV, check the volume level. If the volume remains too low even after turning the control to its maximum, check the volume control on your computer's sound card or within the software program you are using.
K
Katherine MarksSep 12, 2025
How to adjust sound pitch on AWA LCD TV?
- T
  Tammy DavisSep 12, 2025
  If the sound on your AWA LCD TV is too high pitched or too low pitched, adjust the equalizer to an appropriate level.