EasyManua.ls Logo

AXEM Technology AT-07 - Laser Scanner Index (Optional); Infrared Light Scanner Index (Optional); RFID Low Frequency Index (Optional); RFID Ultrahigh Frequency Index(Optional)

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
Fichier : AT-07 tablet user guide20190423_AT-
07_user_guide AT-07 tablet
Version : V1.0
19/46
3.1.3 1D Laser Scanner Index (Optional)
• Light source: visible laser diode
• Identification ability: 1D
• Scanning speed: 104 times/second+12 times/second
(two way scanning)
• Scanning distance: 2.5cm-114.3cm
• Scanning angle: 47±3°(default) /35±3°(reduced code)
3.1.4 2D Infrared Light Scanner Index (Optional)
• Identification ability: 1D, 2D, OCR
• Image sensor: 752*480 CMOS
• Scanning precision: ≥5 mil
• Scanning angle: rotate 360°, incline±50°, deflection ±50°
• Field of View: Horizontal 36°, vertical 23°
• Depth of field: 4cm-23.5cm
• Exercise tolerance ability: horizontal speed 12.7cm/s
• Light intensity: LED 350LUX(13cm)
• Environmental luminance: 0~100,000 LUX
3.1.5 RFID Low Frequency Index (Optional)
• Working frequency: 134KHz or 125KHz
• Operation mode: 134KHz supports full-duplex (FDX) communication , half-duplex (HDX)
communication
• Profile: Support ISO11784/5
• Support Cards: EM, TEMID, TK and compatible card
• Identification distance: 3cm (FDX)/5cm (HDX)
3.1.6 RFID Ultrahigh Frequency Index(Optional)
• Working frequency: 865-868MHz/920-925MHz
• Support agreement: EPC C1 GEN2/ISO 18000-6C
• Output power: 10dBm-30dBm
• Identification distance:
• 920-925MHz50cm/200cm/350cm
• 865-868MHz 150cm/300cm
3.2 General Functions
3.2.1 On/Off
Open the tester
Under the "off "condition and there is electricity in the battery, long press the power key to start the
equipment.