EasyManua.ls Logo

AXEM Technology AT-07 - 6 Faults and Solutions

Default Icon
46 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE info@axemtec.com +33 (0)1 41 94 11 85 www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
Fichier : AT-07 tablet user guide20190423_AT-
07_user_guide AT-07 tablet
Version : V1.0
46/46
6 Faults and Solutions
If you meet the following problems during the using process, please try to use the "Faults and Solutions"
first to do the relative operation. If the problems still exist, please contact AXEM Technology support.
Problem
Reason
Solution
Unable to switch on the tester
The time of pressing the power
key is not enough.
Press the power key for over 2
seconds and more.
Low Battery
Charge the tester
Some programs can't be used
normally.
The storage space is not
enough.
Clean the messages of built-in
multimedia promptly and other
application programs as well as
the download application
records.
The standby time is not enough.
The battery performance
declines
Change the battery.
Play games and music for a long
time.
Limit the time of playing games
and music.
Charging fault
Poor contact
Check the contacts or change
plug.
Low battery vollabele
There will be no charging
display. Charging for about half
an hour and then unplug it to
recharge.
Battery fault
Change battery.
Wrong charger type
Change proper charger.
Charger fault
Change or mend the charger.
The equipment is automatically
closed
The battery electricity is severely
not enough.
Please charge.
Setting reason
Check whether setting the auto
power-off or not.
Get accident interference.
Restart
Contact AXEM Technology: sales@axemtec.com / +33 (0) 1 41 94 11 85