AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
31/46
Label Write: In the main menu, click on HF demo program, enter the RFIDHF Demo presentation
interface, and then click on the "label Write" into the label write interface or click on the label write
button in above picture. Label Write interface is shown below:
After entering the interface, the user can choose to write URI or MIME. URI type only needs to fill
specific data to support English, in writing, please use English URI specified protocol name such as:
http://www.vim.org. Click the Write button to complete input; there will be a corresponding message.
Write MIME needs to indicate the MIME type name; name should not exceed 255 bytes; content
supports in Chinese and English, you can also directly edit the raw bytes to facilitate the input, the decimal
value of each byte is marked with minus sign segmentation, numerical overflow section will automatically
discarded.
Raw bytes: When editing the right box, you can input audio and other information at the bottom
hexadecimal code. Then click write to.
When the device according to the card when the card contacts within the URI and MIME start different
functions, such as phone calls, open web pages, etc.
Note: URI is the uniform resource descriptor; MIME is Multipurpose Internet Mail Extensions.
To Next Page