25
AXIS 240Q - Event Configuration
7. Click OK to save the Event in the Event Types list.
Please see the online help for descriptions of each available option.
Motion Detection
In the Motion Detection menu, you can configure the video source(s) for motion detection.
The motion detection feature is used to generate an alarm whenever movement occurs (or
stops) in the image. Motion detection is configured in Include/Exclude windows, of which
up to 40 (10 per video source) can be configured.
• Include windows target specific areas within the whole image
• Exclude windows are areas to be ignored within the Include window
Once configured, the motion detection windows will appear in a list when motion
detection is selected to trigger an event. See
How to set up a triggered event above.
Note: Using the motion detection feature may decrease overall performance in the video server.
How to configure Motion Detection
This example describes how to configure Video 1 for motion detection:
1. Click Motion Detection in the Event Configuration menu.
2. Select video source 1 from the menu.
3. Click the Configure Included Windows radio button.
4. Click New.
5. Enter a descriptive name of your choice under Windows name.
To Next Page
Loading...
Need help?
General
