3-1
Chapter 3
OPERATION
Everyone benefits from the safety of others.
Trailering
The trailering information contained in this section describes general guidelines and
procedures used by many boaters. We recommend, in addition, that you always follow
the specific information provided by the manufacturer of your trailer.
Load Carrying Capacity
The certification label attached by the manufacturer on the left forward side of the trailer
will show the maximum load carrying capacity of the trailer. The label is required to
show the Gross Vehicle Weight Rating (GVWR), which is the load carrying capacity plus
the weight of the trailer itself. Be sure that the total weight of your boat, gear and trailer
does not exceed the GVWR. Verify tire pressure for load capacity.
Notice: Consult your trailer dealer for other state regulations concerning
brakes, lighting and other equipment options.
Hitch
Hitches are divided into classes that
specify the gross trailer weight (GTW)
and maximum tongue weight for each
class. Always use a hitch with the same
class number as the trailer, or greater.
Most boat trailers connect to a ball hitch
that is bolted or welded to the towing
vehicle. Clamp-on bumper hitches are not
recom mended.
The trailer hitch coupler must match the
size of the hitch ball. Never use a hitch ball
that does not match the trailer coupler. The
correct ball diameter is marked on the
trailer coupler.
KC-1700
KC-0043C-A
SOCKET
RELEASE
HANDLE
TOWING VEHICLE
HITCH
PROPER SIZE
HITCH BALL
CLAMP
TRAILER
COUPLER
RELEASE HANDLE
LOCK PIN
LATCH
Figure 3-1. Trailer Hitch
To Next Page
Loading...
Need help?
General
