Axis AGN/C Series - Function for Weighing Animals (LOC)

32 USER MANUAL
__________________________________________________________________________________________________________________
15.11 Function for weighing animals (LOC)
The function allows weighing animal moving on the scale.
Press MENU key.
When LOC is displayed press  T 
key.
The following options appear on
display successively:
- LOC oFF – out of function,
- LOC on –automatic measurement
after loading the scale,
- LOC Prn – measurement initiated by
pressing key,
- LOC CFG – function configuration
When LOC on is displayed press  T 
key.
Tare the scale using  T  key if
necessary and place the animal on the
pan.
Wait until the weighing result is
averaged – scale display will be
blinking. Then scale will show stable
averaged result and will send it through
serial port. Final result is displayed on
the display and send via serial port to
computer or printer.
The result remains on display for about
10 second.
If we choose LOC CFG option can
choose from:
- LOC SPL – inserting number of
samples,
- LOC tM – inserting sample time,
- LOC thr – inserting work threshold
(weight that will be surely exceeded
after putting an animal on the scale).
Important notes:
1. The loads less than Min are not averaged.
2. In the case when placing the animal takes more than 5s, it is advised to use
LOC-2 option (measurement initiated manually). It will allow performing
measurement in right moment pressing key
0.00g
LOC
LOC oFF
LOC on
25.00g
25.00g
PrInt
MENU
T
T