Axis AGN/C Series - Liquid Density Determination

46 USER MANUAL
__________________________________________________________________________________________________________________
15.19.2 Liquid density determination
This function determines liquid
density basing on plunger weight in
air and in examined liquid with
known volume, using the formula
below:
where
m
1
– plunger weight in air
m
2
– plunger weigh in a liquid
V – plunger volume
Plunger volume is stored on its
hanger.
To enter the value use the following
keys:
- digit increase,
- decimal point,
T - next digit,
MENU - end.
Phase I: measurement in air.
Phase II: measurement in liquid.
To print measurement result and
begin next measurement press
key.
V
mm
21

 
MENU
MENU
T
T
T
T
0.000g
Liquid
Plunger
5.51
Press Tare
9,7700g
0,0000g
8,9800g
dEnSity
dEn on
-
-
Volume
M1
M2