Axis AGN/C Series - Page 45

USER MANUAL 45
_________________________________________________________________________________________________________________
To print a density determination report after all necessary measurements, connect
a printer to the balance and press key. A sample for solid mass density
determination is shown below:
Date: ...
Time ...
MEASUREMENT NO.
= ...
WEIGHT in air
= ... g
WEIGHT in a liquid
= ... g
DENSITY
Liquid density
Liquid temperature
= ... g/cm
3
= ... g/cm
3
= ...
o
C
Operation sequence (weighing in air and in liquid) for below-balance weighing:
Phase I: measurement in air.
Phase II: measurement in liquid.