USER MANUAL 33
_________________________________________________________________________________________________________________
17.2 Autozeroing function (AutotAr)
When the function is activated, the scale
automatically ensures stable zero indication if
the pan is empty or if zero indication was
acquired by pressing
T
key.
To turn on the function use MENU key and using
T
key choose AutotAr and then Aut on
To leave the function press MENU key, then
choose AutotAr and Aut OFF.
Note:
1. AUt sign occurs only in scales with LCD
display.
2. In scales with active
0
key function
function changes name into AutoZE
(autozeroing) and works only when the scales is
unbiased.
To Next Page
Loading...
