Axis AKA120 - 6 Keys and Indicators

USER MANUAL 9
____________________________________________________________________________________________________________________
6. Keys and indicators
Description of basic key functions and indicators:
 T 
- tarring (enter mass subtracted from weighed mass)/ confirmation of selected
menu options,
 0 
- zeroing (option),
- result printout (transmission),
- internal calibration,/ accelerated options viewing

- switch: special function/ weighing,
MENU
- enter to special function menu,
I/
- switch on / switch off (standby),
indicator
- shows stabilization of weighing result,
linear indicator
- indicator of balance load (0-100%),
OFF indicator
- appears after the balance is switched off with I / key,
distinction of last digit
- informs that reading unit value is lower than acceptable indication error
(balances with legal verification, de)
Max, Min, d, e, I
- metrological parameters of the balance.
The use of keys during entering numeric values (special functions):
- increment current digit,
- insert comma,
 T  - move to next position,
MENU - finish entering.
0
kg
Max Min e= d= I