EasyManua.ls Logo

Axis AX 1102BT - Specifications; General Specifications; FM Stereo Radio Specifications; AM Radio Specifications

Axis AX 1102BT
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 14

General
Power supply: 12VDC (11V-16V), Test voltage 14.4V, negative ground
Maximum power output: 45W x 4 channels
Continuous power output: 20W x 4 channels (4
10% T.H.D.)
Suitable speaker impedance: 4-8ohm
Pre-Amp output voltage: 4.0V (Play mode: 1KHz, 0dB, 10K
load)
Fuse: 15A
Dimensions (WxHxD): 178 x 50 x 166mm
Weight: 1.7kg
Aux-in level:
500mV
FM Stereo Radio
Frequency range: 87.5-108.0MHz
Usable sensitivity: 8dB
µ
Frequency response: 30Hz-15KHz
Stereo separation: 30dB(1KHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: >55dB
AM(MW) Radio
Frequency range 522-1620KHz
Usable sensitivity (S/N=20dB) 30dBµ
Components
Mounting sleeve 1
Machine screws M5x6 mm 4
Mounting bolt (50 mm) 1
Wire connector 1
Removable face plate case 1
Trim plate 1
Removal key 2
Operating Instructions 1
Rubber cushion 1
External microphone 1
Note:


Related product manuals