EN - 8
General Notes for Bluetooth
1. For some types of mobile phones,
after the
unit still appearto be
Q
module name on the
mobile phone and select
submenu!hen the unit %YZZ[%!
!\+&
find the unit name in the phone menu and,
reconnect (check if your mobile phone has the
A2DP & AVRCP functions).
2. When pairing, some types of mobile phone
e
3. Depending on the mobile phone, if private
mode is selected,
'
disconnect
4. For mobile phone, the Bluetooth device
name must be primary symbols or numbers.
5. After CONNECT, if no sound produced,
please check the Bluetooth stereo
on the phone switched ON.
Bluetooth Operation Menu Function
Press the knob more than 2 seconds to enter
menu !hen each press changes the
mode as follows:
— — — — — — — — — — — — — — — — — — — —
DSP mode
Rotate the knob to choose DSP sound effect:
POP -> ROCK -> CLASSIC -> FLAT ->OFF
— — — — — — — — — — — — — — — — — — — —
BEEP ON/OFF mode
Rotate the knob to beep sound
on or off.
— — — — — — — — — — — — — — — — — — — —
SEEK 1/2 mode (in Radio mode)
Rotate the knob to choose radio seek mode 1
or 2.
SEEK 1: Station will stop when the
next station is received.
SEEK 2: Station will stop when |<<
or >>| button is released and next station is
received.
— — — — — — — — — — — — — — — — — — — —
VOL mode
Rotate the knob to choose volume last/adjust
mode.
V-LAST: The turn-on volume level is the
volume of latest power off.
V-ADJ: Press the knob to enter Volume Adjust
mode #otate to set the turn-on volume level.
— — — — — — — — — — — — — — — — — — — —
12/24 HOURS mode
Rotate the knob to choose time format: 12 or
24 HOUR.
To Next Page
Loading...
