EasyManua.ls Logo

Axis AX-902 - Technical Specifications

Axis AX-902
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
TECHNICAL SPECIFICATIONS
CD/MP3/WMA PLAYER SECTION
Signal to Noise Ratio > 60 dB
Channel Separation > 50 dB (1kHz)
Frequency Response 20Hz - 20 kHz
TUNER (FM)
Frequency range 87.5 - 108 MHz
Intermediate frequency 10.7 MHz
Sensitivity 2.8 µV
Stereo separation 30 dB
Signal to noise ratio 50 dB
Channel step 100 kHz
TUNER (AM)
Frequency Range 522 - 1710 KHz
Intermediate Frequency 10.71 MHz
Usable Sensitivity 32 dBμV
GENERAL
Power Supply 12V DC (10.8 - 15.6V allowable)
Speaker impedance 4 or 8 Ohm
Output power 40W x 4CH
SUB OUT
Frequency Response 20 Hz - 50 Hz
Sensitivity 300 mV
Max Output 4V
RCA OUT
Frequency Response 20 Hz - 20 KHz
Sensitivity 200 mV
Output Impedance 2 K
Max Output 5 Volt (max.)
RCA IN
Frequency Response 20 Hz - 20 KHz
Sensitivity 775 mV
Input Impedance 20 K
USB Operation and Compatibility, USB 1.1 , USB 2.0 Full Speed.
BLUETOOTH
Version V1.2
Range 5M
Audio Stereo Audio Streaming
DIMENSIONS
Chassis 178(W)x50(H)x158(D) mm
7(W)x2(H)x6.2(D) inch
Nose piece 188(W)x58(H)x20(D) mm
7.4(W)x2.3(H)x0.8(D) inch
Note: This unit has been designed to be compatible with the latest MP3 and USB technology. There is a wide variety
of memory cards, USB sticks and software formats available. However not all may be compatible with this product.
Specication and design is subject to improvement and modication without notice.

Related product manuals