Axis AX-906 - Connecting Ipod; Customizing Audio; Video Settings

12
Program Playback
The desired sequence of tracks to play can be set using the PROG function.
1. Press and hold
Prog button on the remote control.
2. Enter the track number (for VCD) or title number followed by chapter number (for DVD) besides the
memory location.
3. When all tracks have been programmed, select
PLAY and press Enter. Program playback will start.
4. To clear all program entries, press
Prog and select CLEAR.
5. To stop program playback, press
Stop button twice.
Frame-by-frame playback
To move ahead one frame at a time during playback:
1. Press Step button on remote control to move ahead one frame.
To return to normal playback, press .
PAL / NTSC (P/N)
Press and hold P/N button to switch between PAL, NTSC, AUTO system.
CONNECTING IPOD
Connect iPOD portable devices and play songs through the car stereo. Control iPod by connecting it to the
special cable supplied.
Note: After connection, iPod cannot be independently controlled. All controls will be transferred to the head
unit.
Playing Songs in iPOD
You now can play songs from the iPOD once the cable is properly connected.
1. Connect iPOD to the supplied iPOD cable.
2. Unit automatically detects the device and displays the iPOD main screen.
The operation of this car stereo feature is basically the same as the iPOD unit. Note the equivalent key function
below.
Car Stereo and iPOD equivalent key function
Note: Please refer to your iPOD user’s manual for operating instructions.
CUSTOMIZING AUDIO / VIDEO SETTINGS
AUDIO SETUP
1. Press
VOL knob to enter AUDIO setup. Selected item will be highlighted. You can set BASS, TREBLE,
BALANCE, FADER, SUBWOOFER, TA VOLUME.
2. Press
or button to select item. Rotate VOL knob to make adjustments.
3. Press VOL knob to exit settings.
VIDEO SETUP
1. Press and hold VOL knob to enter VIDEO setup. Selected item will be highlighted. BRIGHTNESS,
CONTRAST, SATURATION, HUE, SHARPNESS can be set
2. Press
or button to select item. Rotate VOL knob to make adjustments.
3. Press and hold VOL knob to exit settings.
Note: N means Negative; P means Positive
Depending on model’s feature, some items may not show on screen.
Car Stereo iPOD Functions
Rotate VOL knob Rotate CLICK WHEEL Up/down category/le browsing
Press VOL knob Press SELECT button Selecting a category/Play song
Press (BD/LD)Return Press MENU button Return one level up