Axis AX-906 - Setting up the DVD Player

13
SETTING UP THE DVD PLAYER
The unit can be customized to suit your preferences. Language, video and audio settings can be programmed
so playback will always use your preferred settings.
Important:
1. Load any disc into the unit before you can access the setup.
2. Press
Setup on the remote control.
Setting Rating Password
1 Press
Setup on the remote control.
2 Using Navigation keys select
System Setup > Password and press Enter.
3 Enter the default password
‘0000’ and press Enter to unlock rst and then enter new 4 digit password
and press Enter. The unlock logo will switch to lock indicating password has been set.
Note:
• The default password is
‘0000’.
• In case you forget your password, use the master password
‘8888’ to unlock and reset the password.
• Master password will only work while Setup button is pressed during playback.
Settings
System Setup
Language Setup
Audio Setup
Video Setup
Speaker Setup
Digital Setup
Category
TV System
Auto Play
TV Type
Password
Rating
Default
OSD Language
Audio Language
Subtitle Language
Menu Language
MPEG4 Language
Audio Out
Key
Brightness
Contrast
Hue
Saturation
Sharpness
Downmix
OP Mode
Dynamic Range
Dual Mono
Options
NTSC, PAL, AUTO
ON, OFF
4:3PS, 4:3LB, 16:9
Setup password
Setup rating level
Restore to factory settings
Select preferred options appear on screen
Analog
Setup key level
Use navigation keys on remote control to setup
desired level.
LT/RT, Stereo, VSS
Line Out, RF Remod
Off-2/8-4/8-6/8-FULL
Stereo, Mono L, Mono R, Mix Mono