15
Reset
When the unit freezes, you can reset it. Press
[ RST ] with a ball-point pen or similar tool.
Reset
Note:
When the unit has been reset, all the settings will return to default settings.
Replace a Fuse
If there is no power, the fuse may be damaged and need to be replaced.
1. Take out the unit from dashboard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage of the damaged fuse.
4. Replace the fuse while the unit is disconnected from power.
Steering Wheel Control
Programming
1. Touch the [ ] button, the settings
menu is displayed.
2. Touch [ SWC ], the SWC menu will be displayed.
3. Set each key with an individual function.
4. Touch [ Pair ] to program.
5. Press each individual steering wheel control button for each corresponding function.
6. Once the final steering wheel control button is programmed, the functions are saved
and the programming will end.
(Touch [ Reset ] to reset the programming.)
Settings
To Next Page
Loading...
Need help?
General
