Axis F44 - Product Initial Setup; Password, Capture Mode, and Power Frequency

AXISF44DualAudioInput
Howtoresettofactorydefaultsettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresetto
factorydefaultwillresetallsettings,includingtheIPaddress,
tothefactorydefaultvalues.
Note
Theinstallationandmanagementsoftwaretoolsareavailable
fromthesupportpagesonwww.axis.com/techsup
ForproductswithmultipleIPaddresseschannel1willhavethe
address192.168.0.90,channel2willhavetheaddress
192.168.0.91andsoon.
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonandreconnectpower.See
Hardwareoverviewonpage6.
3.Keepthecontrolbuttonpressedfor15–30secondsuntilthe
statusLEDindicatorashesamber.
4.Releasethecontrolbutton.Theprocessiscompletewhenthe
statusLEDindicatorturnsgreen.Theproducthasbeenresetto
thefactorydefaultsettings.IfnoDHCPserverisavailableon
thenetwork,thedefaultIPaddressis192.168.0.90
5.Usingtheinstallationandmanagementsoftwaretools,assign
anIPaddress,setthepassword,andaccessthevideostream.
Note
Toresetasinglechanneltotheoriginalfactorydefaultsettings,
usethebuttonprovidedinthatproduct’swebpage.
Itisalsopossibletoresetparameterstofactorydefaultviatheweb
interface.GotoSetup>SystemOptions>Maintenanceandclick
Default.
11