Do you have a question about the Axis M1124 and is the answer not in the manual?
Camera Type | Network Camera |
---|---|
Environment | Indoor |
Sensor Type | CMOS |
Maximum Resolution | 1280x720 |
Frame Rate | 30 fps |
Maximum Frame Rate | 30 fps |
Lens | Fixed |
Focal Length | 2.8 mm |
WDR | No |
Day/Night | Yes |
Audio | No |
Compression | H.264, Motion JPEG |
Power over Ethernet | Yes |
Network Protocols | IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, SMTP, FTP, DHCP, DNS |
Ethernet | 10/100 Mbps |
Power Source | PoE |
Operating Temperature | -10 to 50 °C |
Minimum Illumination | 0.5 lux at F2.0 |
Steps to access the product via a web browser.
Instructions for accessing the product remotely via the internet.
Overview of interactive controls available on the Live View interface.
Buttons to adjust the image display size in the browser.
Enables Wide Dynamic Range for improved visibility in challenging lighting.
Details on streaming video using the H.264 compression format.
Information on streaming video using the Motion JPEG format.
Recommended method for accessing live video via Internet Explorer.
Provides shortcuts to essential settings before initial product use.
Instructions for adjusting the camera's focus.
Configuring various video stream settings like resolution and compression.
Predefined sets of stream settings for quick configuration.
Advanced image settings for the camera.
Defining specific regions of interest within the camera's field of view.
Saving and accessing specific camera positions for quick steering.
Methods for accessing saved camera preset positions.
Steps to create and save a new camera preset position.
Configuring motion detection based on defined areas within the video feed.
Verifying the current firmware version for problem-solving.
Instructions for updating the product's firmware.
Troubleshooting common problems and their solutions.
Detailed specifications of the camera sensor and lens.
Technical details regarding video compression, resolutions, and frame rates.