Axis M31 series - How to Trigger an Action

AXIS M31 Network Camera Series
How to install the camera
• Turn off the Zipstream functionality.
How to trigger an action
1. Go to Settings > System > Events to set up an action rule. The action rule denes when the product will perform certain
actions. Action rules can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select what Trigger must be met to trigger the action. If you specify more than one trigger for the action rule, all
of them must be met to trigger the action.
3. Select which Action the camera should perform when the conditions are met.
Note
If you make changes to an active action rule, the action rule needs to be restarted for the changes to take effect.
9
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com