Axis P12 - Connect the Cables

AXISP12NetworkCameraSeries
ConnecttheCables
1.Optionallyconnectexternalinput/outputdevices,e.g.alarmdevices.Forinformationon
theconnectorpins,seeConnectorsandButtonsonpage14.
2.Connectthemainunittothenetworkusingashieldednetworkcable.
3.Connectthesensorunittothemainunit.Ifrequired,thecablecanbeshortened,see
ShortenSensorUnitCableonpage25
4.Connectpower,usingoneofthemethodslistedbelow:
-PoE(PoweroverEthernet,Class2).Ifavailable,thisisautomaticallydetected
whenthenetworkcableisconnected.
-Connectpowerviatheconnector.Forinformationontheconnectorpins,see
ConnectorsandButtonsonpage14.
24