Axis P1445-LE-3 - Integrate with Genetec Security Center

AXISP1445-LE-3LicensePlateVerifierKit
Integration
3.SelectEnableaccount.
4.SelectCameraaccess.
5.SelectLicenseplaterecognition.
6.CopytheIPaddress.
IntheAXISLicensePlateVerierapp:
1.GotoIntegration>Directintegration
2.AddtheIPaddressorURLtothe2Ndevice.
3.SelectConnectiontype.
4.SelectwhattheBarrierisusedfor.
5.Typeyourusernameandpassword.
6.ClickEnableintegration.
7.ClickSave.
Tocheckintheintegrationisworking:
1.Goto2NIPVerso
2.GotoStatus>Events
IntegratewithGenetecSecurityCenter
ThisexampledescribessettingupadirectintegrationwithGenetecSecurityCenter.
InGenetecSecurityCenter:
1.GotoOverview
2.MakesurethatDatabase,DirectoryandLicenseareonline.Ifthey’renot,runallGenetecandSQLEXPRESSservices
inWindows.
3.GotoGenetecCongTool>Plugins
4.ClickAddanentity
5.GotoPluginandselectLPRplugin
6.ClickNext
7.ClickNext
8.ClickNext
9.SelecttheLPRpluginyou’veaddedandgotoDatasources
UnderALPRreadsAPI:
10.CheckEnabled
11.InName,type:PluginRESTAPI
12.InAPIpathprex,type:lpr
13.InRESTport,select443
26