AXIS P33 Network Camera Series Installation Guide Page 5
ENGLISH
AXIS P33 Network Camera Series Installation
Guide
This installation guide provides instructions for installing an AXIS P33 Network Camera Series on
your network. For all other aspects of using the product, please see the User’s Manual, available on
the CD included in this package, or from www.axis.com
Notes:
• Before you begin, make sure that the package contents, the required cables, tools,
and documentation are available. See Package contents below.
• This network camera is intended to operate with PoE; if not available use AXIS PoE Midspan 1 port (not
included).
Package contents
1. “Package contents” on page 5
2. “Hardware overview” on page 6
3. “Mount the camera” on page 7
4. “Assign an IP address” on page 9
5. “Set the password” on page 12
6. “Adjust the Lens” on page 14
7. “Complete the installation” on page 15
Item Models/variants/notes
Network camera AXIS P3343, AXIS P3343 -V
AXIS P3344, AXIS P3344-V
AXIS P3346, AXIS P3346-V
AXIS P3367-V
Dome covers Clear transparent cover
Smoked transparent cover
Labels 2 adhesive serial no. labels
Mounting kit Resitorx screw driver, drill template, 2 screws and plugs,
terminal block connector
CD AXIS Network Video Product CD including product documentation,
installation tools and other software
Printed materials Installation Guide (this document)
Axis Warranty Document
AVHS Authentication key
Optional accessories Mounting bracket (region specific)
See www.axis.com for information on available accessories
To Next Page
Loading...
Need help?
General
